HOME | CAPABILITIES | SAMPLES | QUALITY | CONTACT US | LOCATION | DOWNLOADS | COMPANY INFO | PARTNERS
Capabilities
- Laser Cutting
- Tube Laser
- Robotic Welding
- Conventional Welding
- Machining / Milling
- Turret Presses
- Brake Presses
- Stamping - Coil Feed
- Punch Presses
- Shearing / Sawing
- Other
- Powder Coating
- Wet Painting
- Assembly
- Packaging
Contact Us
Steel Craft Corp 105 Steel Craft Dr. Hartford, WI 53027 Phone: (262) 673-6770 Fax: (262) 673-4380 Email: info@scc-wi.com
Finish/Roll/Drill/Thread
Rollers
- 14 GA x 48” Maximum Length
- 7 GA x 72” Maximum Length
- Angle & Bar Stock Roller
Tube Bender
- PINES
- Vertical 2 - T Tube Bender
Drill Presses
- (16) Various Drill Presses
- 1¼ ” Drill Capacity / 1” Tap Capacity
Radial Arm Drill Presses
- CINCINNATI BICKFORD
- 5” Drill
- 3” Tap Capacity
- 15 HP Spindle
- ACRA RADIAL
Turret Lathe
- WARNER & SWASEY 3A
- 11/16” Shaft Capacity - 22” Chuck
- ACRA RADIAL
Engine Lathe
SUMMIT
- 10 ¾” x 60 Over Cross Slide
- 19” DIA Over Bed
- 27” DIA Over Gap
- 10” Chuck
- 15” 4 Jaw Independent
Threading
OSTER
- ¼“ TO ½“ Thread Capacity
- Pipe Thread to 1” Unlimited Length
PROCUNIER TAP HEADS (2)
- Single Spindle ½ “ Capacity
- (1) DBL Spindle ¼ “ Capacity
TAPMATIC TAP HEADS (6)
- Standard #4-40 to ½
- 13 Capacity
WILTON TAPPING UNIT (9)
- #6 TO ¾ Threading Capacity
- 86” DIA Table
Surface Grinders
CHEVALIAR
- 10” x 20” - Auto Feed
BOYER SCHULTZ
- 6” x 18” - Hand Feed
Finishing
BLAST SYSTEM
- Aluminum Oxide or Plastic Grit Abrasive System
- Reclaim & Dust Collector - 14’ W x 20’L x 15’ H
GRIND MASTER
- With Dust Collector - 36” W - Any Thickness
- Deburring - Grainning
RSA DEBURRING MACHINE
- Deburrs Angle
- Bar, Rod, or Tubing (ID & OD)
- Including Miters
RSA DEBURRING MACHINE
- Deburrs Angle, Bar, Rod, or Tubing (ID & OD)
TIMESAVER
- SUMMIT
- 10 ¾” x 60 Over Cross Slide
- 19” DIA Over Bed
- 27” DIA Over Gap
- 10” Chuck
- 15” 4 Jaw Independent
Threading
- OSTER
- ¼“ TO ½“ Thread Capacity
- Pipe Thread to 1” Unlimited Length
- PROCUNIER TAP HEADS (2)
- Single Spindle ½ “ Capacity
- (1) DBL Spindle ¼ “ Capacity
- TAPMATIC TAP HEADS (6)
- Standard #4-40 to ½
- 13 Capacity
- WILTON TAPPING UNIT (9)
- #6 TO ¾ Threading Capacity
- 86” DIA Table
Surface Grinders
- CHEVALIAR
- 10” x 20” - Auto Feed
- BOYER SCHULTZ
- 6” x 18” - Hand Feed
Finishing
- BLAST SYSTEM
- Aluminum Oxide or Plastic Grit Abrasive System
- Reclaim & Dust Collector - 14’ W x 20’L x 15’ H
- GRIND MASTER
- With Dust Collector - 36” W - Any Thickness
- Deburring - Grainning
- RSA DEBURRING MACHINE
- Deburrs Angle
- Bar, Rod, or Tubing (ID & OD)
- Including Miters
- RSA DEBURRING MACHINE
- Deburrs Angle, Bar, Rod, or Tubing (ID & OD)
- TIMESAVER
Copyright © 2009 Steel Craft Corporation. All Rights Reserved.